Atlas Copco - G2FF Compressor
The G2 oil-injected screw air compressor provides an energy-efficient, reliable workplace air compressor that minimizes the total cost of ownership.
Ideal for workshops, body shops and small industrial users.
- The new G-Series compressors offer zero hassle, and zero worries, featuring high reliability, low maintenance, silent operations, environmentally friendly operations, and ability for an integrated dryer
- Reliability –The G series is designed, manufactured and tested in accordance with ISO 9001, ISO 14001 and ISO 1217. The screw compressor technology allows 100% continuous duty cycle and are built for a long lifetime of reliable operation
- Reduced energy costs – Our G compressors offer the low energy consumption and high efficiency of a rotary screw compressor. Thanks to load/no load control, the compressor controller switches automatically to the optimum control mode for high, low, and intermittent air consumption
- Plug and play installation – In addition to boasting a minimum footprint, the G series discharges cooling air from the top, allowing placement against the wall or in a corner. The tank mounted G with built-in dryer reduces space requirements even further, making it ideal if you have limited space at your facility, while saving on installation costs
- Easy maintenance – Service points are grouped together and are accessible through the removable panel. The spin-on oil separator and filter are designed for easy maintenance. Extended maintenance intervals allow for filters to be only changed out once per year and oil once every 2 years or 8,000 hours
- The new G-Series compressors feature all-new BASE controller which offers advanced monitoring and controls. Improvements include: Icon-Based display, pressure settings, temperature reading, running hours and loaded hours read-out, service warning and the ability to change pressure settings directly on controller
- Silent operation – Atlas Copco supplies G compressors with full sound enclosures and belt-driven element, which reduce the sound levels to 67 dB(A). The rotary screw technology minimizes vibration, while optimized cooling air flow enhances quiet operation
- Integrated air treatment – The G 7-15 air compressors are available with an advanced built-in refrigerant air dryer. By cooling the compressed air and removing water before it can enter your compressed air network, it prevents rust in your compressed air piping, avoids damage to your equipment and minimizes maintenance costs
Efficient
IE3 premium-efficiency motor lowers energy use and costs.
Quiet
The low-vibration screw element minimizes noise to allow installation close to the point of use.
Full Feature
Integrated refrigerant air dryer. Wet vessel to ensure a lower load on the dryer.
Control
Elektronikon® Base controller gives you easy, intuitive control. Service indications and visual alerts safeguard performance and reliability.
Customise
A tank-mounted model with varying receiver sizes available.
Integrated
A refrigerant dryer can be fully integrated to ensure dry, quality air without taking up extra space.
Peace of Mind
Timer and electronic drains are available for maximum peace of mind.
Oil Heater
Prevent condensation at low loads and improve reliability with the optional oil heater.
Compressor Type (50Hz) –
G2
Max Working Pressure (bar e, psig) –
10, 145
Capacity FAD (l/s, m3/hr, cfm) –
4.9, 17.6, 10.4
Installed Motor Power (kW, hp) –
2.2, 3
Noise Level (dB(A)) –
61
Standard Air Receiver Size (L, gal) –
200, 60
Weight (kg/lbs) –
190/419
Dimensions (DxWxH mm) –
665 X 1430 X 1260
Outlet Connection Size:
G1/2”
Electrical Supply (Compressor) –
230V / Single Phase
Electrical Supply (Dryer) –
230V / Single Phase